💥Samsung Auto Patch File💥

List of file

• Samsung M022G AutoPatch File  Password:

                   M022G AutoPatch Firmware Double click and Copy

 

•  Samsung A225F U3 AutoPatch File  Password:

                  A225F U3 AutoPatch Firmwae Double click and Copy

 

•  Samsung  A315F AutoPatch File   Password:

                 A315F AutoPatch Firmware Double click and Copy

 

•  Samsung A217F U8 Android 11 AutoPatch File  Password:

                  A217F U8 Android 11 AutoPatch Firmware BIT 8 Double click and Copy

 

•  Samsung A127F U5 Auto Patch File  Password:                   

                  A127F U5 Auto Patch Firmwar Double click and Copy

 

•  J400f U9 Autopatch Firmware  Password:

                   abrmmeerak123 Double click and Copy

 

• SM-A205F U7 Autopatch Firmware Os11  Password: CLICK HERE 

•   SM-A307GN U4 Autopatch Firmware Os11 

 

• M105F U4 os-10 Autopatch Password: Click here

 

•  Samsung Galaxy S20 SM-G985F U3 AutoPatch 

 

•  SM-A305F U6 AutoPatch Firmware

 

•  SM-A217F U8 Autopatch Firmware Os11

 

  NOTE: If you have Oem on and KG prenormal for fix enable OEM from developer option

If u need help just add comments down below

Flashing Introduction:

Use Odin flash tool:

Odin is a popular tool used by Samsung users to flash firmware, kernels, and other files onto their devices. It's a powerful tool that can be used to customize, repair, or update your Samsung device. In this article, we'll take you through the steps to use Odin flash tool.

Step 1: Download Odin and Samsung USB drivers

The first step to using Odin is to download the tool and the Samsung USB drivers. You can find Odin and the Samsung USB drivers on the internet. Make sure to download the latest version of both the tool and the drivers.

Step 2: Put your Samsung device in download mode

To use Odin, you need to put your Samsung device in download mode. To do this, turn off your device and then press and hold the volume down button, home button, and power button at the same time. When the screen turns on, press the volume up button to enter download mode.

Step 3: Connect your Samsung device to your PC

Connect your Samsung device to your PC using a USB cable. Make sure the USB drivers are installed correctly, and your device is detected by your PC.

Step 4: Load the firmware into Odin

In Odin, click on the AP button and load the firmware file that you want to flash onto your device. Make sure you've downloaded the correct firmware for your device.

Step 5: Start the flashing process

Once the firmware is loaded into Odin, click on the start button to begin the flashing process. Do not disconnect your device during the process.

Step 6: Wait for the flashing process to complete

The flashing process may take a few minutes. Once it's complete, you'll see a green "PASS" message on Odin. Your Samsung device will then reboot.

That's it! You've successfully used Odin to flash firmware onto your Samsung device. Remember to be careful when using Odin and to only flash firmware files that are compatible with your device. Happy flashing!